Combination Smoke and Carbon Monoxide Detector Alarm, 2-Pack Beeps Warning Smoke and CO Alarms for Basements Travel Home Office House Bedroom Living Room Car, Battery Operated, Comply with UL 217/2034

Price: $69.99
(as of Mar 23, 2025 02:57:28 UTC – Details)

Product Description

KEEP YOUR FAMILY SAFE THEN EVER

Combination Smoke Detector Alarm and Carbon Monoxide Detector Alarm Can Detect the threat of these Two Gases: Smoke and Carbon Monoxide.

Photoelectric Sensor Detects Smoke, Smoke Detect While Minimizing the false alarms.Carbon Monoxide Detector alarm Using High accurate Electrochemical Sensor, alerts you to Carbon Monoxide Danger. insurance Safety of your life.Suitable for all the Place Possible to Produce Cambo Smoke and Carbon Monoxide, Such as your Home, Living room, Bedroom, Dinning room, Hotel, Cars… Also Useful When you are Enjoying the Barbecue, Using Charcoal Warm yourself, or Putting it in your Parking Garage, etc.

NOTE:

Please thoroughly read the user manual before using.If the unit sounds all the time or it is of malfunction, please reinstall the battery to repeat the operation OR Please put it into clear air until it’s normal. If CO ALARM BEEPS：Only when detected clear air can it silence the CO alarm(if the room still exists high level of CO, the alarm will keep alarming until the air was cleaned)

Test the alarm First, HOW TO TEST IT(3 steps):

Step 1: Install the batteries in clean air , then press the test button for five seconds to test the units electronics, beeps will sound if it’s normal;Step 2: Leave it in clean air for one minute;Step 3: Then put it into a sealed bag, spray some smoke or CO gas into the bag and seal it. Waiting for about one minute, the Alarm will go off if it’s normal.

[NOTE: DO NOT test it by directly burning something under this alarm, which is an invalid test.]

HOW TO SILENCE THE ALARM

SMOKE ALARM BEEPS: When smoke alarm beeps you can press the test/rest button to enter it into mute state(NOTE: If you want to exit the mute state, you need to press the button again-[Manually exit]; or it will auto-exit the mute state after waiting for about 6 munites or when the alarm detected clean air-[Auto-exit])CO ALARM BEEPS：Only when detected clear air can it silence the CO alarm(if the room still exists high level of CO, the alarm will keep alarming until the air was cleaned)

[NOTE: If the unit sounds all the time, The unit is of malfunction. please Reinstall the battery to repeat the operation OR Please put it into clear air Until the unit is normal.]

Working Parameter

Sensitivity & Time for CO Alarm: 70PPM Between 60 to 240 minutes; 150PPM Between 10 to 50 minutes; 400PPM Between 4 to 15 minutesSensitivity for Smoke Alarm: 2 .08%/ft +/-25% OBS; Standby Current: <80uA; Alarm Current: <80mAOperation Ambient Condition: Temperature Operating Range: 40 °F (4.4°C) to 100 °F (37.8°C) ; Humidity Operating range: 10-95% RH non-condensing; Audible Alarm: 85dB

Easy to install

Turn the alarm body counterclockwise and take off the bracket.(When installation please follow the circular arrow direction that Marked on the product for rotating the Mounting base/Bracket: PRESS DOWN AND TWIST)Hold the bracket in the installation position as specified in the Recommended Locations, mark installation holes of the bracket with pencil.Drill the two marked installation holes; Tap the two plastic grommets into holes with hammer.Mount the bracket to the ceiling by inserting and tightening the supplied screws into plastic grommets. Fix the alarm on the bracket and turn the alarm body clockwise, until fully inserted on the bracket. Do not install it in kitchens/garages/furnace room/bathrooms, INSTALL AT LEAST 15 FEET AWAY FROM ANY FUEL BURNING APPLIANCE.

Appearance and Button

Green LED: The green LED flashes every 40 seconds to indicate the unit operate properlyRed LED: When a dangerous level of smoke or carbon monoxide is detected the red LED will continuously flash and the alarm will sound: The alarm sound pattern is four short alarm beeps for CO alarm and continuous beeps for the smoke alarm.One ‘chirp’ every 40 seconds is an indication that the battery is low

Alerts You to Danger

When a threat is detected, the smoke and carbon monoxide alarm sounds a loud 85-decibel siren that is designed to wake even the soundest of sleepers.

A single button allows you to silence alarms and test if the device is working.

Sleek, Low-Profile Design

Half as thick as a standard alarm, Equipped with both photoelectric smoke sensor and electrochemical CO sensor alarm packs premium detection features into a sleek, compact unit. The ultra-thin design features a white finish that blends seamlessly with most home decor.

Package Contents:

1 Pack:

1 × Alarm Unit;

2 × Screws;

1 × User Manual

2 Pack:

2 × Alarm Unit;

4 × Screws;

1 × User Manual

About Installation site

Need to be installed in living rooms, ceilings, cars or other places where people stay for long periods of time. A better option is to install it in the bedroom, hallway, basement, car or living room.

Keep your family safe with this battery operated smoke and carbon monoxide alarm; battery powered alarms provide continuous monitoring of CO and smoke levels, even if there’s a power failure(Operated by 2 x 1.5V AA Batteries (not included)
2-in-1 Accurate, Reliable & Highly Sensitive Alarm: Equipped with both photoelectric smoke sensor and electrochemical CO sensor that work independently of each other; every second counts; detects both fast and slow-burning fires, and instantly notifies you when dangerous smoke or CO concentration is detected while minimizing false alarms; provides the ultimate protection from 2 deadly threats, all contained in 1 unit
Indicator lights on the face of the unit display the presence of smoke or carbon monoxide, while an 85dB siren provides a clear, loud warning upon detection. Note: Normal smoke gas is Smoldering fire smoke gas, Smoldering fire smoke gas is different from kitchen/cooking oil fumes. the smoke alarm is designed to detect and alarm for normal Smoldering fire smoke ags, not for kitchen/cooking oil fumes, kitchen/cooking oil fumes causes many false alarm, so the new safety standard UL217 requires smoke alarm depletes the fales alarm caused by kitchen/cooking oil and reduce the rate of false positive. please install the device in the right place under instructions.
Simple to Use: Test/Silence button enables you to test the alarm weekly, and to easily silence the alarm when false alarms occur; malfunction and low battery warnings allow you to easily know the working status of the alarm; in case of an emergency, an alarm tone of over 85 dB will sound throughout your entire home, instantly alerting the entire household, even those in sleep, The unit is of malfunction if the unit sounds all the time, Reinstall the battery to repeat the operation Until normal.
Quick & Easy Installation with Guaranteed Quality: Product Dimensions: 4 * 4 * 1.5 inch, Requires no rewiring; easy to mount on any wall or ceiling with the included mounting bracket, screws and anchor plugs; certified to meet the UL safety standards for your peace of mind and absolute confidence in our product. you can get: 1. two detector alarms with Mounting bracket, 2. one manual, 3. four screws.